BALLY slot machine 25 cent coin mechanism fits machines from 1960s to 1980s

Description

PLEASE READ THIS AD COMPLETELY TO THE BOTTOM OF THE PAGE BEFORE BUYING MY PARTS
I DON'T WANT ANY MISS-UNDERSTANDINGS
I have a used Bally slot machine
25 cent coin mechanism
it's been tested and seems to working as it should
I have inserted many quarters testing it and it's
working it does reject some quarters and that's normal
for any
mechanical coin mechanism
This coin mechanism will work in the
Bally
mechanical version
and the
Bally Electro Mechanical version
It's hard to tell from my photos but it a very clean and shiny
coin mechanism it looks new but it's not.
I have a front and back photos
and also a side view
The side view shows 2 flat head screws
there are 4 all together 2 on each side these
are removable screws
there are 3 holes on each side
The screws can be removed up or down to fit your type of Bally slot machine
most of the older
mechanical
Bally's slot machines use the 2 lower holes
and the Electro Mechanical's use the top and bottom holes
I will place them into
the 2 lower holes on each side before shipping.
If your Bally machine uses any other holes
tell me and I will place them into the
the location you
specify
The slot machines in the photos
are not included they just for a reference
THIS COIN MECHANISM WILL NOT REPAIR ANY BROKEN MACHINE
THE MACHINE MUST BE IN WORKING ORDER.
THIS IS JUST A REPLACEMENT FOR YOUR COIN MECHANISM
IF KEEPS REJECTING MOST IF NOT ALL OF THE COINS
YOU ARE INSERTING
OR
IF THEY KEEP GETTING JAMMED UP AND YOU HAVE
TO KEEP HITTING THE REJECT BUTTON TO CLEAR THE STUCK COINS
IF THAT'S HAPPENING THEN YOUR COIN MECHANISM
IS MOST LIKELY WORN OUT.
TO FIND OUT CHECK BELOW:
THEIR IS A ADJUSTMENT ON THE COIN MECH
IT'S CLOSE TO THE TOP OF THE COIN MECH
WITH THE SLOT MACHINE DOOR OPEN YOU SHOULD BE
ABLE TO SEE IT THEIR SHOULD BE A SCREW
THAT IS NORMALLY A FLAT DRIVE SCREW IT ALSO CAN BE A PHILLIPS
HEAD SCREW
THAT
YOU CAN TRY TO ADJUST IT BY TURNING IT
IF YOUR COINS KEEP
GETTING STUCK WHAT IT DOES IT WIDENS
THE GAP SO THE COIN SLIDES THROUGH EASIER
BECAUSE SOMETIMES THE COIN MACHANISM
GETS SO DIRTY THE COINS WILL STICK
YOU SHOULD NOT NEED TO TURN IT VERY MUCH TO ADJUST IT
CHECK THAT BEFORE MAKING YOUR PURCHASE
I DON'T WANT YOU TO REPLACE A WORKING PART
IF YOU DON'T NEED TO.
ALL SALES ARE FINAL
ALL SALES ARE FINAL