IGT Slot Machine 1-S-Plus Ram Clear,1-Bill reset,1-Battery, and 1-battery holder

Description

PLEASE READ THIS AD COMPLETELY TO THE BOTTOM OF THE PAGE BEFORE BUYING MY PARTS
I DON'T WANT ANY MISS-UNDERSTANDINGS
IGT S-PLUS CPU CLEAR AND BV SET UP CHIPS WITH
EMAILED INSTRUCTIONS AND A REMOVABLE BATTERY SYSTEMS KIT
THAT INCLUDES 1 NEW 3.6 VOLT AND 1 NEW BLACK PLASTIC
BATTERY HOLDER THAT IS INSTALLED ON THE CPU BOARD THAT
CONVERTS YOUR SLOT MACHINE TO A REMOVABLE BATTERY SYSTEM .
(IGT CPU BOARD NOT INCLUDED REFERENCE ONLY)
WHATS INCLUDED:
2 RESET EPROMS 1 RAM CLEAR & 1 ALL IN ONE BILL
VALIDATOR SET AND DENOMINATION SET.
1 NEW 3.6 VOLT LITHIUM BATTERY
1 NEW BLACK PLASTIC SOLDER IN BATTERY HOLDER
2 PAGES OF EMAILED INSTRUCTIONS ONLY FOR RESETTING
THE SLOT MACHINE.
I DO NOT SUPPLY INSTRUCTIONS FOR REMOVING THE OLD BATTERY AND INSTALLING THE NEW BATTERY HOLDER
(THE 2 PAGES OF INSTRUCTIONS WILL BE EMAILED TO YOU THROUGH EBAY'S MESSAGES ONLY
NO PAPER COPIES WILL BE MAILED OUT YOU CAN MAKE COPIES OR DOWN LOAD THEM FROM EBAY MESSAGES.)
[ DO NOT ASK ME TO SEND THESE INSTRUCTIONS TO ANY EMAIL ADDRESS OUTSIDE OF EBAY'S MESSAGING SYSTEMS
BECAUSE I WILL NOT ]
CPU CIRCUIT BOARD NOT INCLUDED IN PHOTO #4
If you have a CODE-61 and it does not reset with reset key you are stuck in a 61 loop.
If you have a CODE-43 and the Reels are turning slow wont reset with the key.
CODE-12 low battery and you need to replace the Low battery or a dead battery.
Hopper wont payout the slot machine locks up makes a error sound reset key clears
it but error
returns as soon as you win or when you press the cash out button.
Other errors that wont go away even after you reset your slot machine with reset key.
All of these are signs that you need to do a Ram Clear repeated errors will not go away.
And when to clear the ram you also need to turn your bill validator back on and setup your
coin Denomination.
These 2 reset e proms (chips) are the
27C512 when using these e proms
you do not need to move jumpers on your CPU motherboard,
If a seller is selling 27C256
E proms (chips) you need to change the jumper below the chips on the CPU motherboard
I don't sell those e proms they are no good.
If you own an IGT S-plus slot machine, you definitely need a set of these chips
in case you need to clear the ram-or at least restart the bill acceptor.
Also, there good to just have around
in case and you will some day have to replace your CPU battery to clear your CPU to factory settings. The BV (Bill Validator or bill acceptor) chip is needed if you have one.
These two microchips work on S-PLUS machines: Upright and Slant Top slot machines
Like double diamond, red white blue, haywire, 5X pay and many other S-Plus slot machines that require a IVC123 clear chip
if you own an IGT Slot machine you will need these chips some time in the future.
Easy to use instructions:
insert chip in game chip socket of cpu, power machine and push menu button,  follow INSTRUCTIONS -INCLUDED WITH CHIPS.  Works on MOST IGT S-PLUS, new/old style boards, regardless of which style your using -(upright, slant, round top.)
NOTE: The BV chip will not upgrade bill validator to accept new currency.
chip must be replaced in validator head.
You will receive a IVC123 clear chip and a SET15 BV will be in a crush proof container.
Please make sure these are the chips you need for your machine.
I got these chips surplus they are used and all are tested just before shipping the only reason they would not work in your slot
machine is if you install them backward or break a pin.
If you reset your slot machine and you can't get past the 61 contact me and I will tell you how to get past that it because there are
IGT S-Plus slot machines that require a extra step to complete the reset procedure.
I know this because I am a slot machine repair technician and have experienced this issue before.
The tags on the chips will be replace and hand written because the originals clue did not hold and were falling off so I replaced them.
STEP BY STEP Simple to follow INSTRUCTIONS INCLUDED
.
NOTE:
C
are must be used when handling these sensitive chips.
If the Chip is installed backwards it will be destroyed!
If your not sure if you have a S+ MPU board look at the one in the Photo.
Your MPU board must look like the one in the photos!
These eproms are 100% Tested
I do accept returns if the eproms are used or damaged from you installing them
backward
if you admit you damaged it
accidentally
(Since these eproms are pre-tested I know that what I ship is
100%
working because I test each and everyone of them just before shipping and are guaranteed to work and upon arrival as long as you the installer does not install any one of them backward or drop any and damage any of the delicate pins that would be the only reason why my part would not work any parts that you your self damages and tries to say I shipped a defective part because you your self damaged it I will fight your false claim if you damaged the part and you are honest with me and admit that it's your fault that the part got damaged I will work with you to resolve the issue it may cost you additional fee for a replacement part mainly a shipping fee but each and every claim will be handled differently depending on the damaged to the part)
NOTE: care must be used when handling these sensitive chips.  If the Chips are installed backwards they will be destroyed!
If your not sure if you have an S+ MPU board look at the one in the Photo.
Your MPU board must look like the one in the photos!
(Both of these are pre-tested before shipping guaranteed to work and fit your CPU board upon arrival)
I WILL NOT WARRANTY ANY PRODUCT THAT IS DAMAGED DUE TO ABUSE, OR INCORRECT INSTALLATION
*IMPORTANT READ THIS:
AS A SELLER ON EBAY I HAVE A RIGHT TO CHOOSE MY SHIPPING AND
HANDLING TIMES IF I WAS NOT ALLOWED TO CHOOSE I WOULD NOT SELL ANYTHING HERE ON EBAY BECAUSE THAT WOULD NOT BE RIGHT SINCE THIS IS NOT A BRICK AND MORTAR STORE IT'S A INTERNET STORE
I DO NOT SIT IN FRONT OF A CASH REGISTER WAITING FOR THE NEXT PERSON IN LINE
I WORK OUT OF TOWN DAYS 90% OF THE TIME ON THE ROAD REPAIRING SLOT MACHINES ALL OVER THE STATE AND SOMETIMES IN OTHER STATES
THAT'S WHY I HAVE A SHIPPING DELAY
BUT IT SEEMS THAT LOTS OF BUYER'S HERE THINK THAT I NO RIGHT TO RUN MY BUSINESS THAT IS 100% MY BUSINESS THAT I PAY FOR AND RUN 100% BY MYSELF AND IS 100% NOT THERE BUSINESS AND THEY THINK I NO RIGHT TO RUN IT THE WAY I WANT TO THEY THINK BECAUSE I HAVE A SHIPPING DELAY EVEN AFTER SEEING AND READING THE DELAY WILL STILL GIVE ME A BAD 5 STAR RATING ON SHIPPING TIMES WHEN THEY HAVE READ MY SHIPPING DELAY AND PURCHASE FROM ME ANYWAY AND THEN THINK I DID SOMETHING WRONG TO THEM WHEN THEY MADE THE PURCHASE I DID NOT FORCE THEM TO PURCHASE FROM ME BUT IT SEEMS THAT WHEN I SEE MY 5 STAR RATING IT'S ALWAYS DROPPING NEVER INCREASING
I DO NOT HIDE MY SHIPPING DELAY IT'S IN PLAIN SITE SO ANYONE GIVING ME A BAD RATING BECAUSE OF MY SHIPPING DELAY IS A LOW LIFE IN MY EYES AND I DON'T TAKE IT LIGHTLY BECAUSE THE BUYER MADE THE CHOICE TO PURCHASE FROM MY SITE AND SOMEONE GIVING A BAD
RATING IS NOT WELCOME TO PURCHASE FROM ME EVERY AGAIN AND IF YOU DON'T LIKE WHAT I SAY HERE DON'T BY FROM ME BUY FROM A DIFFERENT SELLER I DON'T NEED YOUR MONEY!!!!!!
I TEST ALL MY PARTS THOROUGHLY JUST BEFORE SHIPPING TO INSURE THAT YOUR ORDER IS IN 100% WORKING ORDER.I DO NOT SEND OUT ANY PARTS THAT HAVE NO BEEN 100% TESTED DUE TO EBAYS CORRUPT RETURN SYSTEM.I DO A VIDEO DOCUMENT OF EVERY TESTED PART AND WHATS INCLUDED IN EVERY PACKAGE I HAVE SOLD YOU AND THAT I HAVE PREPARED TO SHIP OUT TO WITH YOUR SHIPPING LABEL AND THE WEIGHT OF YOUR ITEMS ON A SCALE IS ALSO SHOWED IN THE VIDEO DOCUMENTATION THIS IS ALL DONE TO PROTECT YOUR REPUTATION AND MINE AS WELL.
ALL SALES ARE FINAL
ALL SALES ARE FINAL